Generic Products

Turbo II HD

Stop changing air filters every week.

The Turbo II HD spins dust and debris out of the air before it ever reaches your filter. Your engine breathes clean, your filters last, and your crew stops babysitting maintenance.

90% of dust ejected before the filter 3-5x longer filter life 1 moving part 30 min typical install 40+ yrs proven in the field

Request a Quote Call 855-ECO-PRO2

How it works

The dust never reaches your filter

1

Spin

Angled intake louvers force incoming air into a tight cyclone the moment the engine starts. No power, no sensors, nothing to switch on.

2

Eject

Dust, sand, and heavy debris are slung outward and thrown clear through the spinner and exhaust slots before they ever touch your filter.

3

Breathe

Clean air continues down the stack. Your filter only handles the fine particles, so it loads slower and lasts 3 to 5 times longer.

Why crews upgrade

Filters that actually last

Up to 90% of airborne dust is spun out before it loads your filter. Crews go from weekly changes to barely thinking about it.

Money back in the budget

Fewer filters, less labor, and longer engine life. One fleet saved well over $8,000 a year on just two machines.

More hours running

Every filter swap is a machine that stops and a tech climbing the deck. Fewer swaps means more uptime and fewer trips up the iron.

Installed right the first time

Machine-specific kits ship with everything the tech needs. Streamline, Simplify, and SpeedUp the job in the field.

Proven in the field

A Florida fleet cut filter changes 70% in one month

10 to 3filter changes per month

$8,000+saved in year one

2machines, immediate results

Before EcoPro, they were getting about 25 hours out of an engine air filter, 10 changes a month at roughly $100 each. That is $12,000 a year in filters alone. We set them up with the right Turbo II HD hardware and a kit with everything the tech needed to get the job done right the first time. Within a month, they had changed the filter just 3 times. And that is before counting the soft savings: technician time, machine downtime, and the cost to order, receive, pull, and track every filter.

"One of our goals is to continually Streamline, Simplify, and SpeedUp the installation process for the technicians in the field. We have kits for almost every machine, so the install is done right, it is solid, and the results follow."Porter O'Doherty, President, EcoPro

See it work

Watch it throw the dust out in real time

That plume coming off the top is dust and debris your air filter never has to deal with. Every hour the machine runs, the Turbo II is quietly doing this.

Works at idle or full load, spinning up with the engine itself.
Ejects continuously, so there is no bowl to empty and no schedule to keep.
Visible proof your filter is loading slower from day one.

Fitment

Kits built for your exact machine

Every kit ships with the precleaner, adapter, and hardware matched to the machine, so the tech installs it once and it is done.

Dozers

D6 D7 D8 D9 D10 D11

Landfill Compactors

816 826 826K 836 836K

Wheel Loaders

938 950 966 972 980 988

Excavators

320 323 330 336

Running something else? We have kits and stack adapters for most makes and models. Call 855-ECO-PRO2 and we will match you up.

There is more under the hood

Centrifugal pre-cleaning ejects dust automatically, with one moving part and nothing to babysit.
Self-cleaning design means no daily emptying and no maintenance habit to enforce.
Built for the worst conditions, from dozers and compactors to haul trucks in continuous dust.
40+ years proven, tested and validated, backed by machine-specific kits and field guides.
Lifetime-warranted spinner for real peace of mind, and it will not void your equipment warranty.

See What You Would Save Browse Turbo II HD Kits

Specifications

The numbers that matter

Cleaning method Centrifugal pre-cleaning, fully mechanical

Contaminant removal Up to 90% before the primary filter

Filter life 3 to 5x longer, typical

Moving parts One, the spinner

Power required None, driven by intake airflow

Daily maintenance None, self-cleaning by design

Construction All-metal, heavy duty

Install time Under 30 minutes on most machines

Fitment Machine-specific kits for major makes and models

OEM warranty Not affected when installed per guidelines

Warranty 2 years, plus a lifetime-warranted spinner

Field record 40+ years in mining, landfill, construction, and ag

The Turbo II HD mounts directly to the air intake stack. Most installations take under 30 minutes. Contact EcoPro for machine-specific instructions and fitment kits.

Maintenance Best Practices (PDF)

Replacing The Spinner (PDF)

Pre-Screen Cleaning (PDF)

Dust Ejector Port Cleaning (PDF)

Rubber Baffle (PDF)

For machine-specific maintenance guidance, contact EcoPro directly.

Turbo II HD precleaners are warranted for two years from the date of purchase, covering materials and workmanship.

This warranty does not cover damage caused by neglect, misuse, improper installation, or lack of maintenance.

Contact EcoPro for warranty claims or questions.